FaeBill
Wissen

ZUGFeRD 2.5: What the New Release Means for Your E-Invoices

FaeBill Blog Team
•

Translated from the German original (updated 9 November 2026)

This article is also available in German. Read the German version

A finger presses the "Electronic invoices" key on a keyboard

ZUGFeRD 2.5 has been published – an overview

On 10 June 2026, the Forum elektronische Rechnung Deutschland (FeRD), together with its French partner organisation FNFE-MPE, published the new version ZUGFeRD 2.5 (as at August 2026). On 4 August 2026, this was followed by ZUGFeRD 2.5.2, a corrective version that resolves inconsistencies in the EXTENDED extensions; it applies from 1 September 2026. For businesses that create or receive ZUGFeRD invoices, this raises a practical question: do I need to change anything now?

The short answer: for most users who use the EN 16931 profile in the B2B sector or the XRECHNUNG profile for B2G invoices, little changes immediately. Nevertheless, it is worth taking a closer look, because ZUGFeRD 2.5 is the first step in a larger development that also affects the upcoming version XRechnung 4.0.

What is new in terms of content in ZUGFeRD 2.5?

According to FeRD, ZUGFeRD 2.5 brings two main changes:

  • Updated code lists and validation artefacts, aligned with the current version of the European standard EN 16931 on electronic invoicing.
  • New elements in the EXTENDED profile, which are already part of the revised data model of the upcoming CEN standard EN 16931-1.

FeRD's stated aim is to follow each scheduled half-yearly update of the EN 16931 code lists with a matching ZUGFeRD version in future. ZUGFeRD 2.5 should therefore also be understood as a maintenance release that links the standard to the development of the norm.

Important for context: according to FeRD, the new extensions expressly concern the EXTENDED profile – i.e. the profile that goes beyond the core requirements of EN 16931 and allows sector-specific additional fields. For regular B2B invoicing (BASIC and EN 16931 profiles) and for B2G invoices (XRECHNUNG profile), the information published so far does not indicate any structural mandatory changes.

Why the release came in two stages

The publication of ZUGFeRD 2.5 and its French sister version Factur-X 1.09 had originally been announced for 20 May 2026. FeRD and FNFE-MPE postponed the date and split the release into two stages:

  1. Stage 1 (10 June 2026): the mandatory update of the code lists as well as requirements relevant to the French B2B mandate.
  2. Stage 2 (date still open): the planned support for gross invoices and probably further functions from the revised version of EN 16931.

As the reason for the delay, the standardisation organisations cited additional requirements resulting from the upcoming revision of the European standard EN 16931, which made extended testing and quality assurance necessary. No fixed date for the second stage was known at the time of writing; FeRD gives autumn 2026 as the expected timeframe (as at August 2026).

Backward compatibility: what happens to older ZUGFeRD versions?

A common misconception: a new release does not mean that older ZUGFeRD invoices become invalid. Earlier versions such as ZUGFeRD 2.1 or 2.2 remain technically readable and processable; invoicing programs and accounting systems generally support several versions in parallel. For the legal classification as an e-invoice within the meaning of Section 14(1) sentences 3–6 of the German VAT Act (Umsatzsteuergesetz, UStG) (as at August 2026), what remains decisive is which profile was used – not the exact version number.

As a reminder: according to the administrative guidance letter of the Federal Ministry of Finance (BMF-Schreiben) of 15 October 2024, only the profiles BASIC (with restrictions), EN 16931, EXTENDED and XRECHNUNG meet the requirements of EN 16931 and are therefore considered e-invoices within the meaning of Section 14 UStG (as at August 2026). The MINIMUM and BASIC WL profiles do NOT meet these requirements, regardless of the ZUGFeRD version number.

What does ZUGFeRD 2.5 mean for FaeBill users?

FaeBill generates ZUGFeRD invoices in the EN 16931 profile as well as XRechnung 3.x in CII syntax. Since, according to FeRD, the substantive changes in ZUGFeRD 2.5 relate mainly to the EXTENDED profile and to the half-yearly maintenance of code lists, the current release does not give rise to any immediate need for action for users of these profiles. Format generation takes place centrally in the backend; adjustments to changed mandatory fields or validation rules are made there and not in each user installation.

For businesses that receive ZUGFeRD invoices from other systems, the following applies: the obligation to be able to receive e-invoices has already applied since 1 January 2025 to all domestic businesses under Section 14(1) sentence 5 in conjunction with Section 14(2) sentence 2 no. 1 UStG (as at November 2026), regardless of the sender's ZUGFeRD version number. A ZUGFeRD 2.5 document in the EN 16931 profile can be technically received and evaluated in exactly the same way as a document in the EN 16931 profile of an older version.

Outlook: XRechnung 4.0 and the second ZUGFeRD 2.5 stage

ZUGFeRD 2.5 does not stand alone. According to KoSIT (Koordinierungsstelle für IT-Standards, Coordination Office for IT Standards), the European standard will be published in a revised version, EN 16931-1:2026. Building on this, a fundamentally revised XRechnung 4.0 has been announced, which is intended, among other things, to dissolve the previously rigid relationship of "one order – one supply – one invoice" and thus, for the first time, enable collective invoices covering several orders. A preliminary version of the specification is to be made available shortly – expressly not yet for productive use, but to inform users at an early stage.

In practice, this means with regard to format versions: 2026 is a year of preparing for the standard, not of a sudden mandatory version switch. Anyone currently using ZUGFeRD in the EN 16931 profile or XRechnung 3.x does not need to react hastily to either ZUGFeRD 2.5 or a future XRechnung 4.0. This all-clear applies exclusively to the format version – the statutory obligation to issue e-invoices under Section 27(38) UStG (as at August 2026) continues independently in fixed stages: until 31 December 2026 (inclusive), all domestic B2B businesses (i.e. both parties established in Germany) may still issue other invoices (paper; PDF only with the consent of the recipient); until 31 December 2027 (inclusive), this still applies to businesses whose total turnover did not exceed €800,000 in the year 2026; from 1 January 2028, the obligation to issue applies to all domestic B2B businesses – except for small-amount invoices up to €250 (Section 33 UStDV), travel tickets (Section 34 UStDV) and small businesses (Section 34a UStDV). What counts for the stage starting on 1 January 2027 is therefore not the turnover of any earlier year, but specifically the total turnover for the year 2026: anyone exceeding this threshold in 2026 must, as a rule, issue e-invoices from 1 January 2027 – irrespective of ZUGFeRD 2.5 (for the special EDI route under Section 27(38) no. 3 UStG, see below).

What businesses should do now

  • No compulsory version change due to ZUGFeRD 2.5: The current changes primarily concern the EXTENDED profile and code list maintenance, not the core requirements of EN 16931.
  • Keep an eye on the issuing deadlines under Section 27(38) UStG: Businesses with a total turnover above €800,000 in 2026 must, as a rule, issue e-invoices from 1 January 2027; for invoices transmitted via EDI (electronic data interchange) with the consent of the recipient, the transitional period under Section 27(38) no. 3 UStG applies until 31 December 2027 (inclusive) (as at August 2026) – irrespective of the format release described here.
  • Ensure you can receive e-invoices: Since 1 January 2025, all domestic businesses must be able to receive e-invoices (Section 14(1) sentence 5 in conjunction with Section 14(2) sentence 2 no. 1 UStG, as at November 2026) – this applies regardless of the respective ZUGFeRD or XRechnung version number.
  • Check your software's update capability: Anyone using a solution that automatically incorporates format changes does not have to implement version changes such as ZUGFeRD 2.5 technically themselves.
  • Keep an eye on the second stage: As soon as FeRD announces a fixed date for the gross invoice function of the second ZUGFeRD 2.5 stage, it will be worthwhile for affected businesses to review the format versions they use again.
  • Plan for XRechnung 4.0 as a medium-term topic: A preliminary version has been announced – but concrete migration steps only make sense once a production version has been published.

With FaeBill, ZUGFeRD and XRechnung documents can be created directly in the browser; the backend generates the EN 16931-compliant XML. If you have not yet made the switch to structured e-invoices, you can register free of charge and create your first invoices under the freemium model.

Frequently asked questions about ZUGFeRD 2.5

Do I have to change my invoicing software immediately because of ZUGFeRD 2.5?

No. According to FeRD, the new features of ZUGFeRD 2.5 primarily concern the EXTENDED profile and routine code list maintenance. For the BASIC, EN 16931 and XRECHNUNG profiles, the current release does not create any immediate need for action.

Will older ZUGFeRD invoices become invalid as a result of the new release?

No. ZUGFeRD invoices of earlier versions that have already been issued remain valid, readable and processable. What determines the legal classification as an e-invoice is the profile used, not the version number.

What will the second stage of ZUGFeRD 2.5 bring?

According to FeRD and FNFE-MPE, the second stage is to bring support for gross invoices and probably further functions from the revised EN 16931. No specific date has yet been set (as at August 2026).

What does ZUGFeRD 2.5 have to do with XRechnung 4.0?

Both developments are linked to the revised European standard EN 16931-1:2026. XRechnung 4.0 has been announced as a fundamentally revised version that is intended, among other things, to enable collective invoices covering several orders. A version ready for production use is not yet available.

Does this affect me as a small business owner?

Small business owners under Section 19 UStG (German VAT Act) are permanently exempt from the obligation to issue e-invoices under Section 34a sentence 4 UStDV as amended by the JStG 2024 (as at August 2026), but have had to be able to receive e-invoices since 1 January 2025. Format updates such as ZUGFeRD 2.5 do not change this obligation to be able to receive.

Sources

Legal position as at: November 2026

Note: Not tax or legal advice

This article is for general information only. It is not tax or legal advice for your individual situation and cannot replace such advice. It describes German and, where stated, EU law. Other jurisdictions are not covered. Although we research carefully, we cannot guarantee that the content is current, complete or correct. Legislation, case law and administrative guidance (for example, German Federal Ministry of Finance (BMF) circulars or EU initiatives such as ViDA) may change after publication. Please consult a German tax advisor (Steuerberater), a lawyer or another qualified professional for your specific situation. Our statutory liability remains unaffected.

Status: November 2026

Ready for the 2025 E-Invoice Mandate?

Start now with FaeBill and create legally compliant ZUGFeRD invoices in minutes.